5 eye safety tips you should do at work !

eyes are delicate and very easy to damage. A hard blow is not necessary to cause eye injury. In fact, all it takes is a tiny  sliver or speck of metal, a particle of dust, or trace of chemical to do a great deal of damage to your eyes. 

eye injuries may lead to pain and discomfort, medical costs, lost work time, lost wages, and even permanent disability.that’s Why eye safety is verry important for a healthy eyes ! 

1-Sense of safety :

Remember you should never neglect eye protection just because a specific job does not demand it. This is where you must use common sense and exercise good eye safety practices to provide yourself with that extra margin of eye safety for your eyes. 

Note :Consult your supervisor if you have any doubt about the type of eyewear protection needed for a job or specific location. 

2-Make sure your eyewear glasses fit :

If your glasses don’t fit properly, you might be tempted not to wear eyeglasses. If your safety glasses slip, seem crooked, or are too tight, take a few minutes and have them adjusted properly. 

3-Keep your eyewear clean :

Dirty glasses lessen visibility. Wash them regularly with mild soap and water or eyeglass cleaner, then polish with a soft cloth or a tissue. Anti-dust and anti-fog sprays work well on both eyeglass and plastic lenses. 

4-Keep your eyewear in a safe place :

Pits, scratches, or other damage can result if you stick your eye eyewear glasses in a pocket or toss them in a tool box. Damage to lenses can lessen impact-resistance ,therfore provide less than full protection. Also, don’ t hang your goggles by the elastic band. This can stretch the band so it does not fit properly. 

5-keep your eyewear glasses in the hazard Zone :

Do not remove your protective eyewear until you leave the site or are out of the hazard zone. After you have finished with a tool or specific task, there still may be hazardous materials around you from other workers.

   Pss: share it with friends it's important !